Space Heater Cost to Run: Hours, Cycling and Break Even

On this page 6 sections

A heater’s electricity cost depends on its input wattage, the time it actually draws that power and your electricity tariff. At an assumed $0.20/kWh, a 1,500 W heater costs $0.30 for one continuously powered hour. Eight such hours a day for 30 days cost $72. Those are calculation inputs, not a current US average rate or a recommendation to run a portable heater overnight.

Correction, October 25, 2026: the previous version used a historical national rate as a headline and compared heating systems with unsupported broad cost figures. This version gives a tariff-based worksheet and clearly labeled hypothetical comparisons.

Portable electric heater glowing beside a Christmas tree as a cat warms up
A heater appears beside a cat and holiday decorations in this illustrative photograph. It is not a recommended placement or clearance example; follow the manufacturer's instructions and the safety guidance below.

Read the input rating and the tariff

Use the manufacturer’s electrical input power, not a room-size claim or heat-output marketing figure. Convert watts to kilowatts by dividing by 1,000. Our calculation follows the kWh conversion in the DOE’s energy-education worksheet:

Cost = watts ÷ 1,000 × powered-on hours × price per kWh.

A two-hour session does not necessarily mean two hours at full power. A thermostat may switch the heating element off part of the time. If an appropriate meter records kWh directly, multiply that reading by the applicable price instead of guessing the on-time. Only use measuring equipment rated and approved for that load and follow the heater’s instructions; do not improvise an adapter or smart-plug setup.

Price the same schedule at different rates

All rows below assume 1,500 W for the full stated eight hours a day, for 30 days: 1.5 × 8 × 30 = 360 kWh. The rates are selected scenarios, not state averages.

Your usage-linked rateOne powered hour30-day cost
$0.12/kWh$0.18$43.20
$0.20/kWh$0.30$72.00
$0.35/kWh$0.525$126.00

For time-of-use service, divide the powered hours into the relevant rate windows. Four powered hours at $0.12 plus four at $0.35 cost 1.5 × (4 × $0.12 + 4 × $0.35) = $2.82 per day, or $84.60 for 30 days. Fixed utility charges remain separate unless the tariff actually changes them.

Test the cycling assumption

At $0.20/kWh, compare a 1,500 W element during eight elapsed hours:

Assumed fraction of time element is onPowered hours/daykWh/30 daysCost/30 days
100%8360$72
75%6270$54
50%4180$36

This table does not predict your thermostat duty cycle. Room heat loss, set temperature and weather determine how often heat is required. Fan or control consumption while the element is off is excluded from these simplified examples.

A lower wattage can reduce power while operating, but it may run longer to maintain the same conditions. Comparing wattage alone cannot establish a room’s total heating cost. Use measured kWh over comparable conditions when assessing the result.

Bedroom with a made bed and snow-covered trees outside the windows
Snow outside a bedroom illustrates winter conditions. The image does not measure heat loss or support leaving a portable heater running during sleep.

Find the central-heating spending it must replace

A supplemental heater saves money only if the spending it avoids elsewhere exceeds what it adds. Work with a defined period and list both effects.

Suppose measured heater use for a month is 180 kWh and the usage-linked price is $0.20/kWh. Added cost is $36. If lowering central heat safely reduces other energy spending by $50, the net saving is $14. If it reduces spending by only $20, the combined bill rises by $16. Neither reduction is measured evidence; these two hypothetical outcomes explain the threshold.

For central electric heating at the same price, the break-even reduction is 180 kWh. If central heating uses gas, compare the dollars of gas avoided with $36; a heater’s electric kWh cannot be subtracted directly from gas therms. Account for retained gas service charges and avoid making unsafe whole-house temperature changes.

Our space-heater calculator handles basic watts, hours and rates. The electric-bill worksheet helps distinguish usage savings from a shorter month or different weather.

Put operating limits before savings

CPSC’s heater guidance says to keep combustible materials at least three feet away, connect electric space heaters directly to a wall outlet rather than an extension cord or power strip, and never leave them operating while sleeping. Follow the product instructions and check for recalls before use. Cost calculations do not establish that a proposed location or schedule is safe.

FAQ

Does $72 mean every 1,500 W heater costs that much monthly?

No. It assumes $0.20/kWh and 240 fully powered hours. Change the rate, wattage, on-time or month length and the result changes.

Can a thermostat reduce the cost?

It can reduce powered-on time relative to continuously running the same element. The table shows possible duty-cycle assumptions, not a promised saving.

Will a space heater lower my total heating bill?

Only if the spending it replaces exceeds its added electricity cost. If central heat runs as before, the heater adds a new load.

Published by Cost of Owning. Sources, chosen inputs and worked examples serve different purposes. Check the links and assumptions next to the claim before using a number in your budget.

Suggest a correction with this page’s URL, the figure and a supporting source. Read our editorial and correction policy.